Aase Reyes

Aase Reyes

Fagområder

Vitenskapsdisipliner

Konstruksjonsteknologi

Emner

Aluminium, Metaller, Dynamisk last, Formbarhet, Skum materialer

Vitenskapelige publikasjoner

Reyes, Aase; Børvik, Tore (2018). Quasi-static behaviour of crash components with steel skins and polymer foam cores. Materials Today Communications . Vol. 17.

Reyes, Aase; Børvik, Tore (2018). Polymer foam crash components subjected to low velocity impact. Li, Yulong; Zhao, Han (Red.). Proceedings of ICILSM 2018 - 2nd International Conference on Impact Loading of Structures and Materials. 54.

Vysochinskiy, Dmitry; Coudert, Térence; Hopperstad, Odd Sture; Lademo, Odd-Geir; Reyes, Aase Gavina Roberg (2017). Experimental study on the formability of AA6016 sheets pre-strained by rolling. International Journal of Material Forming .
http://hdl.handle.net/11250/2468420

Vysochinskiy, Dmitry; Coudert, Térence; Hopperstad, Odd Sture; Lademo, Odd-Geir; Reyes, Aase Gavina Roberg (2016). Experimental detection of forming limit strains on samples with multiple local necks. Journal of Materials Processing Technology. Vol. 227.
http://hdl.handle.net/11250/2469916

Vysochinskiy, Dmitry; Coudert, Térence; Hopperstad, Odd Sture; Lademo, Odd-Geir; Reyes, Aase Gavina Roberg (2014). Experimental detection of the onset of local necking in an aluminium sheet. Materials Science Forum . Vol. 794-796.

Gruben, Gaute; Vysochinskiy, Dmitry; Coudert, Térence; Reyes, Aase Gavina Roberg; Lademo, Odd-Geir (2013). Determination of Ductile Fracture Parameters of a Dual-Phase Steel by Optical Measurements. Strain. Vol. 49.
http://hdl.handle.net/11250/2459312

Vysochinskiy, Dmitry; Coudert, Térence; Reyes, Aase Gavina Roberg; Lademo, Odd-Geir (2012). Determination of forming limit strains using Marciniak-Kuczynski tests and automated digital image correlation procedures. Key Engineering Materials . Vol. 504-506.

Reyes, Aase Gavina Roberg; Eriksson, Magnus; Lademo, Odd-Geir; Hopperstad, Odd Sture; Langseth, Magnus (2009). Assessment of yield and fracture criteria using shear and bending tests. Materials & design . Vol. 30.

Reyes, Aase Gavina Roberg; Hopperstad, Odd Sture; Berstad, Torodd; Lademo, Odd-Geir (2009). Forming limit diagrams with an FE-based approach for sheets under non-proportional loading. Proceedings. 7th European LS-DYNA Conference. Chapter C. s. 84-

Reyes, Aase Gavina Roberg; Dørum, Cato; Hopperstad, Odd Sture; Langseth, Magnus; Lademo, Odd-Geir; Eriksson, Magnus (2008). Validation study of failure prediction in crash analysis. Topping, Barry H V; Papadrakakis, M. (Red.). Proceedings of The Ninth International Conference on Computational Structures Technology. KAPITTEL.





Publikasjonslisten er hentet fra Cristin. Listen kan være ufullstendig